NEWS
 
 
 
News News
Source:
Author:
Date: 2018-08-13
Click: 2

Ten key points of LED lights

日期: 2018-08-13
浏览次数: 2

lED lighting industry lighting and lighting project, both by the global environment and its industry specificity.


    LED street light power supply is precisely the top priority of LED development. For the related design of LED technology, there are already many kinds of solutions and unique design methods. Let's take a look at it one by one;


    1. Why does the LED light power supply have to be constant?


    The characteristics of LED lighting materials determine that they are greatly affected by the environment. For example, if the temperature changes, the current of the LED will increase, and the voltage will increase, and the current of the LED will also increase. Long-term operation beyond the rated current will greatly shorten the LED bead usage time. The LED constant current is to ensure that the operating current value does not change when environmental factors such as temperature and voltage change.


    2, LED light power supply constant current accuracy


    The constant current accuracy of some power sources on the market is poor, and the constant current scheme such as the popular recommended scheme on the market has an error of ±8% and the constant current error is too large. The general requirement is ±3%. According to the 3% design. The production power supply should be fine-tuned to achieve ±3% error.


    3, LED lamp power supply operating voltage


    The recommended operating voltage of general LED is 3.0-3.5V. After testing, most of the work is at 3.2V, so it is reasonable to calculate according to 3.2V. Total voltage of N lamp beads in series = 3.2* N


    4, the working current of the LED light power supply is what is suitable for Zui


    For example, the rated working current of LED is 350 mAh. Some factories use it at the beginning and design 350 mA. In fact, the working heat is very serious at this current. After many comparison tests, it is ideal to design 320 mA. . Minimize heat and turn more electrical energy into visible light.


    5. How wide is the series and parallel connection of the LED lamp power supply board and the wide voltage?


    In order for the LED lamp power supply to operate in the wide range of input voltage range AC85-265V, the LED series-parallel connection of the lamp board is very important. Try not to use a wide voltage, can be divided into AC220V, AC110V as much as possible to classify, in order to ensure power supply reliability. Since the current power supply is generally a non-isolated buck constant current power supply, when the required voltage is 110V, the output voltage should not exceed 70V, and the series number does not exceed 23 strings. The output voltage can reach 156V when the input voltage is 220V. That is to say, the number of series is not more than 45 strings. Do not use too many parallel connections, otherwise the operating current is too large and the power supply is hot. There is also a wide voltage scheme. APFC active power compensation is to first raise the voltage to 400V with L6561/7527, and then step down, which is equivalent to two switching power supplies. This program is only used under certain conditions.


    6, isolated / non-isolated


    Generally, the isolated power supply is made into 15W and placed in the LED street lamp power supply tube. The transformer is large in size and difficult to put in. Mainly depends on the specific structure of the space, the isolation can only be 15W, less than 15W, and the price is very expensive. Therefore, the cost performance of isolation is not high, generally non-isolated is more mainstream, the volume can be made smaller, Zui can be as high as 8 mm, in fact, non-isolated security measures are done, there is no problem. . Space can also be used to isolate power.


    7. How can the LED light power supply match the lamp bead?


    220*1.414=312V, half of the peak voltage is 156V. On the non-isolated basis, the output wave is the upper half wave and there is no lower half wave. Therefore, the LED street lamp power supply bead series number is used. Some customers first design the light board, then find the power supply and find the power supply. It is difficult to have a suitable power supply, or the current is too large, the voltage is too small (such as 7X1WI>350mA, or V<20V); or the current is too small, the voltage is too high (such as I<200mA or V>25V), the result is Severe heat, low efficiency, or insufficient input voltage range. In fact, choose a good string parallel connection method, the voltage and current applied to each LED is the same, and the effect of the power supply can play the good performance of Zui. Zui's good way is to communicate with the power supply manufacturer first and tailor it. Or self-produced power.


    8, LED series and parallel and PFC power factor


    The isolated input AC220V high-voltage electrolytic capacitor capacity is generally 1W=1UF, AC110V1W=2UF. There are three kinds of power supply PFCs on the market: one is a special circuit without PFC without power factor compensation, and its PF value is generally 0.65. The two are passive power factor compensation PFC circuits, that is, passive power factor compensation lamps, also called flow-by-current circuit boards, which are currently using zui wide reliability, the PF value is generally around 0.92; It is made with active active 7527/6561 circuit, which is active power factor compensation, called AC220V in APFC circuit. AC110V can use electrolytic capacitor of the same capacity, choose 1W=1.5UF. The PF value can reach 0.99, but the cost of this solution is slightly less expensive than the second solution. So the second option is more used. For passive PFC circuits: also known as valley-filled PFC circuits, the DC operating voltage range is half of the peak value of the AC input voltage. If the input is 220V, the peak value is more than 45 strings. Therefore, in order to get a relatively large power factor, the number of series connection of the lamp bead should not be too small, otherwise it will not reach the good working state of zui. The number of series connection on the isolated power supply is related to the number of turns of the auxiliary winding, which must be done. The power supply must meet the output power. The smaller the operating current of the electronic component in the rated voltage operating range, the longer the heating time will be, and the shorter the time will be. LED street light power beads are sensitive to the amount of AC. The higher the AC volume, the worse the light comfort. Generally, an electrolytic capacitor is used to maintain the voltage, and the voltage of the output terminal is reduced as much as possible. The capacity of the electrolytic capacitor at the bottom end cannot be too small, and the ratio of the capacity to the output current is 1 UF < 1.5 MA, otherwise the LED will flicker. The non-isolated input high-voltage electrolytic capacitor is selected in the same way as the isolated type, and the output capacitor is selected to be 1UF<6MA. Dimming LED power supply at the output of the electrolytic capacitor to meet 1UF <0.5MA.


    9, LED lamp power efficiency


    This parameter is especially important for input power minus output power. The higher the value, the lower the efficiency. This means that a large part of the input power is converted into heat. If it is installed in the lamp, it will produce a very high temperature. In addition, the energy emitted by one of our LEDs will be superimposed to produce higher temperatures. The time of all electronic components inside our power supply will decrease with the increase of temperature. Therefore, the efficiency is determined by the power supply. The factor, the efficiency can not be too low, otherwise the heat consumed on the power supply is too large. The non-isolated efficiency is higher than the isolation type, generally more than 80%, but the efficiency is related to the matching method of the lamp board.


    10, LED light power supply cooling


    The main factor of the heat dissipation scheme is that the LED lamp power supply bead can be used under the hot condition to greatly extend the use time. Generally, the aluminum alloy is used, which is more convenient for heat dissipation. That is, the LED lamp power supply bead is attached to the aluminum substrate, and the external heat dissipation area is maximized.


News / Recommending News More
2018 - 05 - 05
点击次数: 73
MAY 8-10. 2018 Light fair International, Chicago. Booth: 3287Exhibits introductionThis exhibition is the world’s largest architectural and commercial lighting exhibition. It shares six exhibition halls to showcase the manufacturer’s specific products. This exhibition enjoys a good reputation in the world. He enjoys new products, new designs, new technologies and The new concept of service, timely ...
2017 - 03 - 07
点击次数: 35
Fall Hong Kong Lighting Show: (HK lighting fair):Bright lighting Booth: M2-A18Time: October 27-30 No.Fall Hong Kong Lighting Show: (HK lighting fair)Booth: M2-A18Time: October 27-30 No.Asia's largest lighting industry exhibitionHong Kong International Lighting Fair sponsored by the Hong Kong Trade Development Council, carried out since 1999, a large number of buyers and exhibitors, as well as inno...
2017 - 03 - 07
点击次数: 19
With the development of LED lighting industry, as the LED backlight ramifications LED panel light, its light uniformity, no glare, delicate structure to give a lot of people's favorite, is the new trend of modernfashion indoor lighting.The main part of the LED panel light1. The panel light aluminum frame:Is the main channel LED cooling, Simple and elegant appearance, you canuse ZY0907, using die s...
Copyright © 2016-2021 Shenzhen Bright Lighting Technology Co.,Ltd.
犀牛云提供企业云服务
Address: Building18, Shancheng Industrial Park, Shiyan Town, Bao'an District, Shenzhen, China . 518108
TEL: 86 -755-23443400
FAX: 86 -755-23443401
邮编:330520
X
等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

等待加载动态数据...

展开