News News
Date: 2018-08-01
Click: 21

Explosion-proof maintenance-free LED lighting

日期: 2018-08-01
浏览次数: 21

Explosion-proof maintenance-free LED lighting Model: BLED 110 (BAD84)

Scope of application

Widely used in oil exploration, refining, chemical, military and other hazardous environments and offshore oil platforms, oil tankers and other places for general lighting and operational lighting;

Applicable to energy-saving renovation projects and places where maintenance and replacement are difficult;

Suitable for places with high protection requirements and humidity;

Applicable to areas 1 and 2 of the explosive gas environment;

Applicable to IIA, IIB, IIC explosive gas environment;

Applicable to T1-T6 group temperature group;

Optical system features

Preferred imported chip with excellent lumen maintenance and high light efficiency

Significantly improve thermal conductivity with surface mount technology (SMT)

Carefully designed honeycomb light-reducing structure to effectively improve the efficiency of the luminaire


Drive system features

Constant current drive with short circuit and over voltage protection

The EA type can be used as normal working lighting and has emergency function; the EB type is simply used as emergency lighting, and is normally closed. Type A and B can immediately start emergency lighting when the main power is off, and can also be used for external switch control to start at any time during main power failure.

It has excellent electromagnetic compatibility and will not cause any interference to other electrical appliances and transmission networks. The power supply itself has excellent anti-electromagnetic interference capability.

Wide voltage compatibility, 20% tolerance voltage fluctuation

The drive power is sealed by a glue to ensure that the components are not corroded


Cooling system features

Carefully designed three-cavity independent structure to ensure the stable operation of all electronic components

Carefully designed heat-dissipating air duct with air guiding structure to ensure the service life of LED light source

Carefully designed independent power supply cavity structure, power supply work is not affected by LED heat, ensuring stable and long life of work


Whole lamp structure characteristics

It adopts IIC explosion-proof structure and IP66 protection grade, and has excellent explosion-proof protection performance.

High borosilicate glass for high temperature energy

All exposed fasteners and accessories are made of stainless steel with high corrosion resistance

Integrated emergency chamber, no need for an emergency box for easy installation and maintenance

The side cavity opening cover is used to facilitate user wiring and maintenance; various installation methods are available for users to choose.

Technical Parameters 

Specification model: BLED 110 (BAD84)

Explosion-proof mark: Exd II CT6

Working voltage: AC/DC 220V±20% 50Hz

Rated power: 5 ~ 300W

Power factor: 0.98

LED luminous flux: 650 ~ 39000Lm

Protection level: IP65

Anti-corrosion grade: WF2

Introducing device: G3/4" inlet specification, suitable for Φ 10mm ~ Φ14mm cable

Terminal block: ≤2.5mm2 wire reliable connection

Installation method: ceiling type (x), wall type 30° (b1), wall type 30° (b2), boom type (g), guardrail type (h), flange type (f)

Executive standards: GB3836.1, GB3836.2, IEC60079-0, IEC60079-1, EN60079-0, EN60079-1

News / Recommending News More
Copyright © 2016-2021 Shenzhen Bright Lighting Technology Co.,Ltd.
Address: Building18, Shancheng Industrial Park, Shiyan Town, Bao'an District, Shenzhen, China . 518108
TEL: 86 -755-23443400
FAX: 86 -755-23443401






  • +86-755-23443400